Wall Lights
High Voltage 220V LED Strip 2835 LEDs 5mm PCB High Output Design
Product Overview: This LED strip is developed as a high voltage lighting solution that departs clearly from conventional low voltage strip designs. Built with 2835 LEDs on an ultra narrow 5mm PCB, the strip operates directly on a 220V system, eliminating the need for external low voltage drivers typically required by 12V or 24V products. Its core electrical and optical parameters remain within familiar, widely accepted ranges. What sets this model apart is the combination of high voltage operation and unexpectedly strong luminous output within a compact form factor. Rather than emphasizing complex control or premium color rendering, the design focuses on installation efficiency, long continuous runs, and high brightness delivered through a simplified electrical structure.
High Density Alternating Dual White LED Strip 2835 LEDs 10mm PCB 240 LEDs/m
This LED strip is designed around a high density layout that expands the concept of alternating dual channel lighting beyond standard configurations. Using 2835 LEDs arranged at 240 LEDs per meter on a 10mm PCB, the strip operates at a higher power range while maintaining a CRI above 80. Warm white and cool white LEDs are placed in a structured alternating sequence, allowing color tone adjustment through channel control rather than integrated packages. For projects requiring a different visual effect, the cool white channel can be replaced with blue, enabling the same platform to support both tunable white lighting and white-plus-color applications. Compared with lower density alternating designs, this model emphasizes output continuity, stronger visual presence, and electrical capacity, making it suitable for installations where brightness and impact take priority.
Integrated Dual White LED Strip with 3838 LEDs 8mm PCB High CRI Tunable Configuration
This LED strip introduces a less conventional LED model to tunable white and mixed color lighting by adopting 3838 LED packages instead of the more common 2835 series. Built on an 8mm PCB with 120 LEDs per meter, the strip makes it clearly above entry level products in terms of color quality. Its defining characteristic lies in the integrated chip configuration: each LED package combines two light sources within a single housing. In its standard form, these are warm white and cool white, enabling smooth adjustment of color temperature without altering the physical layout of the strip. Alternatively, the cool white channel can be replaced with blue, allowing the same platform to serve both functional white lighting and decorative or accent-oriented applications. This flexibility, paired with the distinct optical behavior of 3838 LEDs, gives the product a clearly different identity from conventional tunable white strips.
Dual White LED Strip with Alternating Warm and Cool White 2835 LEDs 8mm PCB 120 LEDs/m
Product Overview: This LED strip is configured to deliver dual white lighting through a clearly defined, alternating LED layout rather than integrated dual chip packages. Warm white and cool white 2835 LEDs are placed in a regular sequence along an 8mm PCB, creating a tunable white solution that relies on physical separation instead of integrate models. The strip follows familiar electrical parameters commonly used in standard single CCT products. Its defining characteristic is the use of an alternating LED layout to enable color temperature adjustment, without relying on higher output levels or complex circuit design. This structure offers a straightforward, visually intuitive approach to dual white lighting, making the product easy to specify, install, and service in everyday projects.
Dual White LED Strip Tunable White 2835 with 8mm PCB 120 LEDs/m
Product Overview: This LED strip is designed to deliver tunable white lighting within a familiar, entry level electrical specification. Using integrated dual white 2835 LEDs, each LED package integrates warm white and cool white emitters in one housing,enabling smooth CCT adjustment without increasing board width or altering standard installation practices. The strip is closely matching the power and output behavior of conventional single CCT products. Rather than pursuing higher brightness or denser layouts, this model focuses on flexibility in light tone while maintaining predictable performance, making it a practical option for projects that require adjustable ambience but do not demand premium optical specifications.
LED Strip with Individual Diffusers and Single LED Cut Design 2835 11mm PCB
Product Overview: This LED strip is developed for applications where precise light control, clean segmentation, and predictable electrical behavior are more important than high visual density. Built with 2835 LEDs on 11mm width PCB, the strip operates at 18W/m, offering stable output for general purpose indoor lighting. This model integrates structural and electrical refinements at the single LED level. Each LED is treated as an independent optical and electrical unit, allowing the product to perform consistently even when customized into short segments. The result is a practical lighting solution that balances straightforward specifications with thoughtful internal design, making it suitable for professional installations where control and reliability are valued over decorative density.
IP68 Waterproof LED Strip with Individual Diffusers and Cuttable Single LEDs
Product Overview: This LED strip is designed as a fully sealed lighting solution for demanding environments where exposure to water, moisture, or dust is unavoidable. Built with 2835 LEDs mounted on a 15mm PCB, it delivering stable and consistent illumination under continuous use. What clearly differentiates this model from conventional indoor strips is its integrated silicone encapsulation, which provides true IP68 protection. The strip is engineered for long term outdoor or submerged applications, while maintaining precise light control and electrical reliability. With a relatively low LED density of 42 LEDs per meter, the design intentionally prioritizes durability, optical comfort, and serviceability over visual density.
10mm RGB LED Strip Light with 5050 LEDs for Dynamic Color Lighting
Product Overview: This RGB LED strip is built around 5050 LED chips arranged at 60 LEDs/m on a compact 10mm PCB, offering a focused solution for projects that prioritize pure color performance. This model is dedicated entirely to multicolor output, allowing each channel to be driven without compromise. Power consumption remains within a controlled range of 12–14W/m, ensuring stable operation while delivering clear and saturated color transitions. With a CRI above 85 for its composite output, the strip maintains acceptable visual quality where color expression rather than white light accuracy is the primary objective.
5050 RGBW LED Strip Light 12mm Wide High Versatility for Color and Warm White Lighting
Product Overview: This LED strip is designed for applications where visual impact and flexibility take priority over compact linear uniformity. By adopting 5050 LEDs at 60 LEDs per meter on a 12mm PCB, the strip delivers a distinctly different electrical and optical profile compared with normal chips products. It balances controlled power input with strong luminous presence. A key distinction of this model lies in its ability to produce both colored light and warm white light within the same strip, allowing lighting designers to shift between decorative and functional modes without changing hardware. The 12mm width provides additional thermal and structural margin, supporting stable performance during extended operation and making this strip suitable for more demanding installation environments.
Ultra High CRI LED Strip Light 180LEDs/m 10mm Width for Color Critical Lighting
Product Overview: This LED strip is designed for lighting scenarios where color accuracy takes precedence over raw brightness. This model is developed around a high color fidelity concept, prioritizing accurate color reproduction within a restrained power, supported by a dense 2835 LED layout on a 10mm circuit board.Rather than pursuing extreme luminous output or electrical loading, this model focuses on balanced photo metric performance paired with superior color fidelity. The result is a light source that maintains natural color appearance across materials and surfaces, while remaining compatible with standard aluminum profiles and compact installation spaces. Although its core parameters may appear similar to other middle power strips, the performance orientation is fundamentally different, targeting precision-oriented applications instead of general illumination.
High CRI LED Strip Light 120LEDs/m 10mm Width with 20m No Voltage Drop
Product Overview: This LED strip is developed as a quality oriented entry solution for projects that prioritize color accuracy, installation flexibility, and electrical stability over extreme output levels. Built with 2835 LEDs at a density of 120 LEDs per meter on a slim 10mm PCB. The performance focus is clearly defined: moderate luminous output combined with reliable long run consistency and refined light quality. The key technical advantage is the circuit design that allows continuous runs of up to 20 meters without visible voltage drop, which is uncommon in strips of this width and power class. Instead of competing on lumen density, this product is positioned to deliver stable, visually comfortable illumination with precise layout control, making it a practical alternative to standard models.
2835 Triple Row LED Strip 276 LEDs/m 20mm Width High Power Linear Lighting
Product Overview: This LED strip is engineered for linear lighting systems that operate at higher power levels and require substantial electrical and thermal capacity. Featuring 2835 LEDs arranged in a triple row configuration on a 20 mm wide PCB, it supports a total density of 276 LEDs per meter and operates within an 18–20 W/m power range. The design targets applications where strong illumination, structural robustness, and long term operational stability are essential. With high luminous output, elevated power handling, the strip is positioned beyond conventional linear lighting products and into a category intended for demanding architectural and commercial environments.
The expanded PCB width and three row structure fundamentally change how the strip behaves compared with the other models. Instead of optimizing for compactness, this model prioritizes load capacity, allowing higher current levels and improved heat dissipation across the board surface. As a result, it functions as a core lighting component rather than an auxiliary or decorative element.
High Output 2835 Dual Row LED Strip 240 LEDs/ 15mm Width 2500 Lumens
Product Overview: This LED strip represents a higher output configuration within the dual row linear lighting category, developed for projects that require substantially higher luminous performance on a robust electrical platform. Using 2835 LEDs arranged in two parallel rows on a 15 mm wide PCB, the strip reaches a total density of 240 LEDs per meter while operating at an elevated power range of 16–18 W/m. With a maximum luminous output of up to 2500 lm/m, it moves beyond standard functional lighting and into a performance-oriented class suitable for demanding architectural and commercial environments.
Compared with lower power model using similar dimensions, this model is defined by its ability to deliver higher light output without compromising operational stability. The wider PCB and dual row layout provide the necessary electrical and thermal headroom to support increased drive current, making the strip suitable for applications where brightness consistency and system reliability are equally critical. In the context of the global LED strip market, this configuration aligns with high tier linear lighting solutions rather than basic or utility grade products.
2835 Dual Row LED Strip 240 LEDs/m 15mm Width for Robust Linear Lighting Systems
Product Overview: This LED strip is built for linear lighting systems that require greater structural tolerance and long term operational stability. Featuring 2835 chips arranged in a dual row configuration on a 15 mm wide PCB, it provides a solid electrical and mechanical platform for installations that exceed the constraints of slim profile designs. With a total density of 240 LEDs per meter, this strip delivers consistent illumination based on reliable, well established photometric parameters rather than peak output targets.
The wider PCB fundamentally changes how the strip performs in real installations. Compared with narrower series product, this 15 mm width allows for improved current routing, enhanced heat spreading, and increased mechanical rigidity. These characteristics make the strip particularly suitable for longer runs, deeper aluminum profiles, and applications where the lighting system is expected to operate continuously under stable conditions.
2835 Dual Row LED Strip 240 LEDs/m 10mm Width for Stable Linear Lighting
Product Overview: This LED strip is designed around a dual row LED layout on a wider 10 mm PCB, offering a structurally balanced solution for linear lighting applications that value stability and uniform illumination. Using 2835 LEDs arranged in two parallel rows, the strip reaches a total density of 240 LEDs per meter while operating at 14–16 W/m with a color rendering index above 85. Rather than pursuing high output positioning, this model focuses on distributing light more evenly across the board surface, resulting in consistent illumination and improved thermal behavior. The wider PCB series support a more stable electrical layout, making this strip suitable for installations where reliability and controlled light quality are expected over long operating periods.